Zeez RC F7 3030 Flight Controller V3

Description: The ZEEZ F7 V3 3030 is an 8 Motor Output, DJI HD System Ready Flight Controller with an on-board 9V@3A regulator to power the DJI Air Unit, with a simple plug-and-play configuration and 5V@3A regulator to power all the peripheral. It uses a powerful F7 processor along with top-of-the-line hardware: ICM42688P Gyro, BMP388 Barometer, with a separate power rail for cleanest data. The ZEEZ F7 V3 3030 comes in a standard 30×30 form factor. It comes with spaces and pads for TBS Crossfire and TBS Unify Nano32 for a very clean and low-profile assembly. We have added a connector for a 2nd ESC to make building X8’s as easy as possible. There are 5 UARTS available as well as an I2C port, SD CARD for Blackbox data record, and an OSD chip for analog video. Specifications: Mounting holes: 30.5x30.5mm LiPo Power input: 3S-6S 8 Motor output BEC 5V-3A / 9V-3A STM32F722 MCU (216MHz max frequency) ICM42688P Gyro/ACC BMP388 Barometer OSD chip Onboard 5 available UARTs / I2C bus SD Card Reader HD Plug for DJI Air Unit or Caddx Vista or Walksnail VTX USB Type C connector Direct solder connection and board space for TBS Nano RX and TBS Unify Pro32 Nano providing the ultimate in clean stack installation Includes: 1x Zeez RC F7 3030 Flight Controller V3 4x Aluminum Standoff 4x Aluminum Nut 1x ESC to Flight Controller 8 Pin to 8 Pin JST SH 1mm Connector 1x ESC to Flight Controller 8 Pin to Free Wires (with JST SH crimp) 1x 2nd ESC to Flight Controller 5 Pin to 8 Pin JST SH 1mm connector 1x 2nd ESC to Flight Controller 5 Pin to Free Wires (with JST SH crimp) 1x JST SH 8 Pin Plastic Housing 1x JST SH 10 Pin Plastic Housing 2x 2.00mm Header Pin for VTX Connection 2x 2.54mm Header Pin for Receiver Connection 1x JST 6 pin to AirUnit Connector Download Wiring Diagram

Price: 76.99 USD

Location: Madison, Alabama

End Time: 2023-12-07T01:13:26.000Z

Shipping Cost: N/A USD