VALVE COVER SPACERS 1/2" FORD 429 , 460 7 Bolt Big Block BBF With GASKETLOK

Description: Valve Cover Spacer Ford 7- Bolt Big Block (429, 460)1/2 INCH THICK VALVE COVER SPACERS WITH GASKETLOK FEATUREINCLUDES STAINLESS STEEL BOLTS AND WASHERS.SOLD IN SETS (TWO SPACERS)Made in the U.S.A. from 100% U.S.A. Billet Aluminum. Some information about installing our valve cover spacers. IF you are using an aftermarket aluminum heads with a good, machined valve cover surface many people (including myself) just silicone the spacer to the head.IF you are using a cast aluminum valve cover & it is good, flat & straight in the gasket surface then just use Silicone (form-a-gasket) between the spacer &valve cover.IF your Head is as cast and rough, we recommend using a gasket between the spacer and the head.IF you are using a tin valve cover (once again MUST be flat) I recommend a gasket between spacer & valve cover.MOST IMPORANT everything MUST be clean & MUST use a good quality gasket.The BEST silicone I have found is Ford Motorcraft RTV for use on 7.3 Power Stroke Diesel Engines! Motorcraft Part number (TA31). You can get it at your local Ford Dealer.We also enclose a information sheet with each set of spacers sold.

Price: 185 USD

Location: Cochranton, Pennsylvania

End Time: 2023-12-12T02:42:32.000Z

Shipping Cost: N/A USD