UPR Catch Can Diffuser Bringing Catch Cans to the Next Level of Performance

Description: UPR Catch Can Diffuser Bringing Catch Cans to the Next Level of Performance (The Upgrade to make your Catch Can perform to it's fullest potential ! ) Part Number: D5032-02 MFG Retail: $39.99 Item Finish: Show Quality Black Anodized Finish Fits Models: UPR 5032 series Billet Catch Can Kits made before 2020 ( Exclusively ) Product Benefits:Precision Plug n PlayPatent PendingMachined in the USA Directional Inlet and OutletVertically Spaced Chambers ( Patent Pending )Increased Media for Maximum Oil CollectionDOES NOT INCLUDE CATCH CAN. Diffuser only for 5032 Series catch cansProduct Description: UPR's Catch Can Diffuser eliminates the oil contamination. UPR's Catch Can Diffuser was designed by analyzing the fluid, vapor and airflow characteristics unique to the internal combustion engine. Resulting in a multi-level design to maximizes the control of oil solids and vapors. UPR's Catch Can Diffuser offers multiple benefits: First, by vertically spacing the inlet screen to a position lower than outlet screen, oil which collects on the inlet screen is inhibited from migration to outlet screen. Thus, the amount of oil entering the exhaust side or outlet is substantially reduced or eliminated. See (FIG. 3) Secondly, it makes it possible to adjust which side of the catch can is the inlet or outlet by simply installing the UPR diffuser in either chamber of your catch can. This eliminates oil pulling through the air with the single level chambers.See (FIG. 1) Most importantly, the UPR Catch Can Diffuser allows the oil and condensation to properly cool and disperse from vapor back to liquid. The extended multi-level design is the key to proper Coalescence within the UPR diffuser and its baffling media. (FIG. 2) Coalescence is a process that allows droplets, vapor and particles to merge and form into a larger liquid state and collect into a more controllable form. This Exclusive design maximizes Coalescence, increasing the catch cans efficiency and it's ability to collect oil vapor. The UPR Catch Can Diffuser virtually eliminates you fromgetting any contamination into your intake tract or combustion chamber. Items Included:UPR Billet Catch Can Diffuser Stainless Steel Filtration MediaInstallation Difficulty:10-15 MinutesRemove UPR Catch CanUnscrew Catch Can TopThen Remove O-ring holding in ScreenInstall UPR Catch Can Diffuser ( Extended Chamber goes to Inlet Side )Re-install O-ring around UPR Catch Can Diffuser Securely Then Simply Screw UPR Catch Can back Together and Re-installWhat is the problem with your PCV system ? The Positive Crankcase Ventilation (PCV) system is used to recycle the gases that leak or “blow-by” the your engines piston rings and create a positive pressure in the crankcase. By venting these gases along with oil mist/vapor from the crankcase and route it back into the intake manifold so it can be burned off. This is a poor fix from automobile manufacturers, because over time the excess oil vapor collects along the inside of the intake tract and forms a “sludge”. This leads to a variety of issues including carbon buildup, retarded timing, detonation, power loss and even engine failure. UPR s fix for the PCV system used on many engines for reducing toxic gases from being released into the atmosphere and eliminating positive crankcase pressure / Blow-By. What does a UPR Catch Can do ? UPR s Billet Catch Can / oil-air separator will condense and collect the oil vapor before it has any chance to reach the intake tract. As the gas and oil vapor enters UPR s can they pass through a Chambered filtering system that cools the oil vapor and gives it something to adhere to. Then the oil forms into droplets and collect in the bottom of the UPR Catch Can so that they can later be drained. This is where the additional Chambered filtering system comes into play allowing only the clean air to pass through so it can eliminate unwanted blow by. All engines have blow by otherwise there would be no need for a PCV system on your engine. PCV = Positive Crankcase Valve, which eliminates Positive Crankcase Pressure. UPR s Catch Can has become one of the most widely used and recommended cures for just about every application. The engine size and horsepower level is not relevant to the performance of the UPR Catch Can. UPR s Catch Can has become a cornerstone by improving the Performance and Economy on any vehicle you install it on. Normal 0 false false false EN-US X-NONE X-NONE Returns are only accepted within 30 days and only if a Return Merchandise Authorization (RMA) has been issued. All returns MUST be brand new and in their original, unopened packaging. (Item returns may be subject to restocking fees) UPR Products reserves the right to refuse any package returned to us without authorization. Returns/Refunds are processed within (30) business days of receipt (not incl. holidays, weekends, transit time, or day package was delivered.) Special order items, item hardware, rebuild kits. replacement parts, emblems or decals are not able to be accepted for return. If a free shipping item is returned, the original outbound shipping will be deducted from the refund. The customer is also responsible for return shipping. If a customer refuses or is not available for an item, they will be charged the return shipping fee by the carrier. If a free shipping item is refused or missed, the outbound shipping will also be deducted from the refund. Changes of address or entering an incorrect address placing an order, the customer is responsible for any address change/correction fees billed by the carrier.

Price: 24.99 USD

Location: Lake Worth, Florida

End Time: 2024-08-01T22:14:15.000Z

Shipping Cost: 0 USD