Sunlu S1/Upgraded S2 FilaDryer 3D Printer Filament Dryer 1.75mm Storage Box

Description: Features of the S2 Filament Dryer Better Printing With Dry Filament - SUNLU S2 Filament Dry Box will remove excess moisture of 3D printing filament, which help you avoid common problems like clogging, poor adhesion and layer migration caused by the dampness of the filament. Heating More Evenly, Drying Faster - As an upgraded product, the S2 drying box adopts a double heating element structure, which heats up faster and evenly heat. Convenient Touch Screen Operation - Our Upgraded Filament Drying Box can adjust temperature (35~70℃) and time (1~99 hours) through the touch screen. After completing setting , the time, temperature, humidity and other indicators will be displayed on the screen in real time. Remember Your Operation - You can choose consumable code like PLA to jump to the corresponding default temperature and time, or adjust them you want. The settings before the shutdown will be remembered until you change settings again. Quality and Service Guarantee - SUNLU FILADryer S2 has a variety of certificates to encure quality, such as CE, FC, RoHS, etc.. And there is one year warranty of our filament dryer and lifetime technical and service support. Packing List 1* Filament Dryer 1* Adaptor 1* Instruction Say No to Moisture Filaments If the filaments are moisture, SUNLU Filadryer S1 can dry it evenly and improve the printing effect greatly. It helps you avoid wasting filaments and printing failure. Easy Operation It is very easy to operate SUNLU filadryer S1. Click right bottom to set heating temp; Press the left bottom for 3 seconds to set heating time. (PV means the actual heating temp in the dryer box; SV means the temp you set) Say Good Bye to Failure SUNLU Filadryer S1 is designed to help you solve the printing problems like Clogging, Layer shift, Stringing and Ahesion. Usage steps： 1.Load the filament 2.pull the filament out from the 1st hole or 2nd hole. 3.turn on thr plug 4.click right bottom to set temperature 5.Clicj left bottom for 3 seconds to set drying time S1 Dryer Size Printing work show Temperature can be adjusted ranging from 35℃~55℃. It can dry many kinds of 3d filaments(1.75mm/2.85mm/3mm PLA,PLA Plus,PETG,ABS,TPU...).Drying when you are printing models, it can improve the printing quality and get better printing results. Filadryer S1 is the best 3d printing mate. On Dec 20, 2023 at 21:38:22 PST, seller added the following information:

Price: 49.99 USD

Location: Rancho Cucamonga, California

End Time: 2024-01-23T08:30:19.000Z

Shipping Cost: 0 USD

Product Images

Sunlu S1/Upgraded S2 FilaDryer 3D Printer Filament Dryer 1.75mm Storage Box

Item Specifics

Return shipping will be paid by: Seller

All returns accepted: Returns Accepted

Item must be returned within: 30 Days

Refund will be given as: Money back or replacement (buyer's choice)

Return policy details:

Brand: SUNLU

Type: 3D Printer Filament Dryer

Material: no

Filament Diameter: 1.75 mm

MPN: Does not apply

Country/Region of Manufacture: China

Unit Quantity: 1

Unit Type: Unit

Compatible Brand: Universal

Compatible Model: For 3D Systems CubePro, For Leapfrog Xeed, For Leapfrog Creatr HS XL, For Formlabs Form 2, For Formlabs Form 1+, For FlashForge Finder, For FlashForge Creator Pro, For FlashForge Dreamer, For Dremel 3D40 Idea Builder for Education, For Dremel 3D40 Idea Builder, For Dremel 3D20 Idea Builder, For Dremel 3D20 Idea Builder for Education, For Creality 3D CR-10, For CraftUnique CraftBot Plus, For CraftUnique CraftBot 2, For CEL Robox, For CraftUnique CraftBot, For BQ Witbox 2, For BQ Witbox, For BQ Hephestos 2, For BQ Hephestos, For BEEVERYCREATIVE BEETHEFIRST+, For BEEVERYCREATIVE BEETHEFIRST, For BEEVERYCREATIVE BEEINSCHOOL, For B9Creations B9Creator, For Anet A8, For Airwolf 3D AXIOMe, For Airwolf 3D AXIOM Dual Extruder, For Airwolf 3D AXIOM, For 3D Systems ProJet 1200

Model: SUNLU FILA Dryer