Centrifugal Vegetable Dewatering Machine Salad Prepare Soya-bean milk Separator

Description: 220V 750W Salad Dryer /Soya-bean milk separator Product Features and Functions:　 1. This product has exquisite design, simple and reasonable structure and high work efficiency. All parts that come into contact with food are made of stainless steel or with special surface treatment, in line with national hygiene standards. 2. Easy to use, flexible and convenient operation, high production capacity: (Put the cut block materials into the bucket, run for about 1-2 minutes to dehydrate, and can also be used continuously, such as soy milk removal, etc.). 3. The machine is made of high-grade stainless steel, which is hygienic and durable, and can be used for soymilk removal, dehydration, oil removal, vegetable water removal, etc., which is simple and practical. 4. Three-layer waterproof device and large water outlet can achieve high-efficiency waterproof effect. 5. This series of dehydrators are widely used in hotels, restaurants, restaurants, and food processing plants. And the canteens of each unit need to desizing, dehydrating, de-oiling, de-vegetable water, etc. when making food. 　Material:High quality stainless steelVoltage:220V Power:0.75KWDiameter of the inner tank5.7inDiameter of the outer tank14.76inHeight:32.48inProcessing efficiency3-5kg/each timeProduct Weight35kgNotice: Please put out the slag bag and clean the inner tank with water. 　 Installation and use instructions: 1. After unpacking, choose a flat ground to place the dehydrator smoothly (note that there should be a certain space behind the fuselage for easy operation). 2. Connect the rated voltage power supply specified by the machine and ensure that the grounding is good. 3. Put in the slag bag, turn on the power and the dehydrator starts to run. 4. Confirm that there is no abnormal noise when the machine is running (when the sieve rotates, the sound is normal when the wind blows). 5. Put the cut material into the filter bag and then put it into the material sieve, press the barrel cover, and the material sieve rotates to gradually throw the water droplets stuck on the material away from the material, so as to achieve the separation of the material and the water. At this time, the machine works normally. 6. If you need to remove soymilk and oily materials, put the filter bag evenly into the sieve, turn the machine and put it into the fuselage barrel, and continuously pour the soymilk into the cover and flow into the filter bag. Rotate to separate pulp and slag. After a certain amount, the residual residue in the filter bag can be taken out, and the work can be continued. 7. After using every day, the sieve should be rinsed, and the filter bag should be soaked in clean water. Wash to prevent odors. 　　 Parts List:serial numberPart Namequantityserial numberPart Namequantity1Welding and assembly of barrel body17compressed spring32Cover18spring positioning core63Motor base19connecting shaft flange14motor110upper retaining basin15Motor seat plate111sieve16Outer spring protection hose312Lower retaining basin1　 Precautions and safety rules: ☆We do not assume any responsibility for failures and accidents caused by improper use by users. ☆It is forbidden to use oversized solids and other hard and overweight bulk materials for dehydration. ☆To ensure the safety of electricity use, it is necessary to regularly check the cable and whether the circuit is in good condition. It is forbidden to use when the insulating layer of the relevant circuit is damaged. ☆The grounding of the dehydrator must be good, and it is strictly forbidden to operate the machine with bare feet and wet hands. When the machine is just started or gradually suspended, the body needs to be supported to prevent the machine from swinging too much and causing accidents. ☆When the dehydrator is working, or the power supply has been cut off but the sieve is still rotating, it is strictly forbidden to use hands or other tools to enter the sieve to get the material. ☆In case of excessive load, lumpy materials or uneven distribution of materials, the machine is caused to work abnormally due to excessive shaking force. First, quickly stabilize the machine and then cut off the power supply (to prevent the machine from falling and causing a safety accident) ), if it is overloaded, you should slowly take out a certain amount of block materials in the sieve (in line with the rated working weight of the machine) before continuing to work. If the material is uneven, the material should be placed flat again, and then the machine should be turned on for work. ☆When the dehydrator is not used for a long time, be sure to disconnect the power supply, and use waterproof, moisture-proof, dust-proof and other protective measures. ☆When the machine is working, it is forbidden for children to play near the machine to avoid safety accidents. 　 Item Number: 220V 750W Salad Dryer(023064) On May 22, 2022 at 19:55:36 PDT, seller added the following information:

Price: 769.5 USD

Location: Rancho Cucamonga, California

End Time: 2024-03-23T14:48:24.000Z

Shipping Cost: 0 USD