Description: Committed to being the best, Standard Engine Management manufactures and distributes a full line of engine management related products, including ignition and emission parts, on-board computers, ignition wires, battery cables and fuel system parts.Their fuel valves are designed to deliver quality in every boxRobust designs backed by focused research meet today's technical needsDecades of industry leading research and development focused on meeting the technicians needsWith industry leading expertise, when original equipment fails, Standard's products are designed to fix the inherent failure issuesStandard is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product STANDARD MOTOR PRODUCT. New in box! FUEL TANK SELECTOR VALVE GAS OR DIESEL 3 PORT FOR MAIN TANK AUXILIARY TANK . Intended for use with the following: Vehicles with one main and one auxiliary fuel tank. Vehicles without fuel return lines. 12 Volt systems. Can be used for either gasoline or diesel fuels. Located between the Fuel Pump and the Fuel Tank* *** 3/8" Hose Barbs for use with 5/16" fuel lines. Not for systems using in-tank fuel pumps or pumps located between the tanks and valve. Note: Fuel injections systems and diesel systems commonly have in-tank pressure pumps. Vacuum not to exceed 8 PSI. Not for marine applications INSTALLATION INSTRUCTIONSThis Selector Valve is intended for use with the following: Vehicles with one main and one auxiliary fuel tank. Vehicles without fuel return lines.12 Volt systems. Ambient temperatures between -40°F and +180°F. The selector valve must be located between the Fuel Pump and the Fuel Tanks. Not for systems using intank fuel pumps or pumps located between the tanks and valve. Note: Fuel injection systems and diesel fuel systems commonly have intank pressure pumps. Vacuum not to exceed 8 P.S.I. Not for marine applications. II. INSTALLATION INSTRUCTIONS Selector valve should be installed as shown above. Choose a protected location near the original fuel line and mount the selector valve to a chassis rail (horizontal valve position preferred). Bolt valve mounting bracket to chassis using external tooth lockwashers for good ground. Route the auxiliary tank fuel line to the selector valve as shown. Cut the original fuel line. Using properly tightened clamps and 5/16” fuel approved flexible hose, connect the fuel lines to the selector valve as shown. Fuel line routing should minimize bends and have largest possible radius for better flow. A fuel filter must be installed between each fuel tank and the selector valve input ports to prevent foreign matter from entering the valve and causing it to malfunction. After assembly, check the system for leaks. Choose a position on the dash to mount the toggle selector switch. Cut the original wire from the sending unit to the fuel gauge and connect it to the selector switch as shown. Connect a new wire from the switch to the auxiliary tank sending unit and another new wire to the selector valve. The connection to the selector valve should be made by placing the properly stripped wire between the two washers and wrapping it twice in a clockwise direction around the terminal. The nut should be securely tightened and a coating of grease applied to prevent corrosion. Connect a new wire from the “accessory” power to the selector toggle switch through a 1 amp fuse. Indicator plate should be used for proper indication of tank selected. It is normal for “Constant Duty” solenoids to run warm. FUEL FLOW: Valve de-energized: flow is from the main fuel tank thru the valve to the fuel pump. Valve energized: flow is from the auxiliary tank thru the valve to the fuel pump. Warranty info:There is a 90 day warranty, defective items must be reported and returned to us within the warranty period (excluding items damaged and/or misused after receipt).
Price: 38.5 USD
Location: Allen, Texas
End Time: 2024-02-28T19:18:07.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return policy details:
Features: For use with 3 port for main tank and auxiliary tank, Not for systems using pumps located between tanks and valve, Not for use with systems using in-tank fuel pumps, Diesel systems commonly have in-tank pressure pumps, Fuel injection systems commonly have in-tank pressure pumps, Vacuum not to exceed 8 PSI, Not for marine applications, 3/8 in hose barbs for use with 5/16 in fuel lines, For use with vehicles without fuel return lines, For use with either gasoline or diesel fuels, For use with 12V systems
Manufacturer Warranty: 90 day warranty
California Prop 65 Warning: This product contains no harmful chemicals.
Item Width: 1.0625 in wide cylinder and 2.25 in wide bracket
Vintage Part: No
OE/OEM Part Number: V21215
Performance Part: Yes
Item Length: 4.5 in
Item Height: 4.5 in
Fuel Type: Gasoline or Diesel
Country/Region of Manufacture: Taiwan
Material: Metal, Plastic
Universal Fitment: Yes
Shape: Cylinder
Placement on Vehicle: Located between the fuel pump and the fuel tank
Filler Neck Diameter: 3/8 in hose barbs for use with 5/16 in fuel lines
Finish: Chrome Plated
Manufacturer Part Number: FV1
Brand: Standard Motor Products
Capacity: N/A
Type: Fuel Tank Selector Switching Valve
Items Included: Valve
