Description: Blonder Tongue AP-60-860A Agile Processor (NIB) AGILE PROCESSOR WITH EAS The AP-60-860A Three-Mode Agile Processor from Blonder Tongue is a digital and analog heterodyne processor. It features three modes: Analog RF, QAM, and QAM / 8VSB; and can output +60 dBmV analog RF and +55 dBmV QAM. The unit is housed in a rackmount chassis that fits in a 1RU rack space.Accepts one analog RF input: CATV sub-band channels T7-T13, CATV standard channels 2 to 135, VHF channels 2 to 13, and UHF channels 14 to 69; and delivers one Analog RF output: CATV standard channels 2 to 135Accepts one digital off-air 8VSB or digital cable QAM input: CATV standard channels 2 to 135, VHF channels 2 to 13, and UHF channels 14 to 69; and delivers one analog RF output: CATV standard channels 2 to 135Equipped with EAS interface which can also be used as an IF (Intermediate Frequency) inputSupports EIA-608 closed captions ConnectorsInputConnector: 1 x F type femaleAnalog Mode (Mode 1):Standard: NTSCTuning: CATV: 2 to 135; broadcast: 2 to 69; Sub: T7 to T13Bandwidth: 6 MhzPower Level: -20 to +30 dBmVQAM Mode (Mode 2):Standard: ITU-T J.83 - Annex B (64 and 256 QAM) Tuning Range: CATV channels 2 to135; T7 to T13Data Rate: 38.8 Mbps (QAM 256); 26.97 Mbps (QAM 64)Bandwidth: 6 MHzPower Level: --20 to +30 dBmVQAM / 8VSB Mode (Mode 3):Standard: 8VSB: ATSC Digital Television A / 53E; QAM: ITU-T J.83 - Annex B (64 and 256 QAM)Tuning Range: 8VSB: VHF (NTSC channels 2 to 13), UHF (NTSC channels 14 to 69); QAM: CATV channels 2 to 135 / T7 to T13Data Rate: 8VSB: 19.392 Mbps; QAM: 38.8 MBps (QAM 256), 26.97 Mbps (QAM 64)Bandwidth: 6 MHzPower Level: -20 to +30 dBmVIntermediate Frequency (IF)Connector: F type femaleInput / Output Impedance: 75 ohmInput Return Loss: 16 dBOutput Return Loss: 15 dBEAS / ALT IF:Input Level: +38 dBmV at 45.75 MHzSwitch Isolation: > 60 dBStandby Carrier: +35 dBmV - RF input < -25 dBmVModes 1 and 3Aural Frequency: 41.25 MHzVisual Frequency: 45.75 MHzComposite Loop Output:Aural Carrier Level: +20 dBmVVisual Carrier Level: +35 dBmVMode 2Center Frequency: 44 MHzOutput Level: +30 dBmVOutputModes 1 and 2Connector: F type femaleFrequency Range: 54 to 864 MHzChannels: UHF, VHF, CATV (standard, HRC IRC)Power Level: Mode 1 (analog): +60 dBmV; Mode 2 (QAM): +55 dBmVPower Level Range: Mode 1 (Analog): +50 to +62 dBmV (in 0.2 dB increments); Mode 2 (QAM): +45 to +57 dBmV (in 0.2 dB increments)Broadband Noise: Mode 1 (Analog) -77 dBc (at +60 dBmV output level, 4 MHz bandwidth); Mode 2 (QAM) -75 dBc (at +55 dBmV output level, 6 MHz bandwidth)Spurious: -63 dBcImpedance: 75 ohmReturn Loss: 15 dBAural / Visual Carrier Ratio (Mode 1): -15 dB ±2Frequency Tolerance: ±20 kHz; 32 to 122°F (0 to 50°C) Adjacent Channel Rejection: 65 dBMode 3Connector: F type femaleFrequency Range: 54 to 864 MhzChannels: UHF, VHF, CATV (standard, HRC IRC)Power Level: +60 dBmV Power Level Range: +50 to +62 dBmV (in 0.2 dB increments)Broadband Noise: -77 dBc (at +60 dBmV output level, 4 MHz bandwidth)Spurious: -63 dBcImpedance: 75 ohmReturn Loss: 15 dBAural / Visual Carrier Ratio (Mode 1): -15 dB ±2Visual Frequency Tolerance:Standard Channels: ±20 kHz; 32 to 122°F (0 to 50°C)FCC Aeronautical Channels: ±5 kHz; 32 to 122°F (0 to 50°C)Video Frequency Response: 1.5 dB peak-to valley (fv-0.5 to fv+4.2 MHz)Video-to-RMS Hum Ratio: 65 dBSignal-to-Noise Ratio: 58 dB (weighted)Differential Gain: 2.0% at 87.5%Differential Phase: 1.0°Over-modulation Indicator: 87.5%Chrominance / Luminance Delay: Per FCC requirementsAudio:Frequency Response: ±1.0 dBFrequency Range: 50 Hz to 15 kHzSignal-to-Noise Ratio: 59 dBTotal Harmonic Distortion: 1.0% at 55 kHz deviationOver-modulation Indicator: 55 kHz ±24.5 MHz Audio Carrier Tolerance: ±150 Hz; 32 to 122°F (0 to 50°C)GeneralAlarms / Monitoring / ControlIndicators:Lock: Green LEDStereo Audio: Green LEDEAS or Alternative IF Activated: Red LEDAudio Over-modulation: Red LEDVideo Over-modulation: Red LEDLocal Monitoring: Front-panel, 16-channel, 2-line LCD screenLocal Control: Front-panel, 16-character, 2-line LCD screen; front-panel navigational key-pad; audio and video modulation adjustment; aural carrier adjustmentPower Requirement110 VAC at 60 Hz - fuse: 1 A, 250 VDC, SloBloPower Consumption36 W maximumOperating Temperature32 to 122°F / 0 to 50°CStorage Temperature-13 to 158°F / -25 to 70°CHumidity0 to 95% RH at 95°F (35°C) maximum, non-condensingDimensions19 x 18.6 x 1.8" / 483 x 473 x 44 mmWeight7 lb / 3.2 kgPackaging InfoPackage Weight10.3 lbBox Dimensions (LxWxH)23.3 x 23.1 x 3.6" Track Page Views WithAuctiva's Counter
Price: 2000 USD
Location: Henrico, Virginia
End Time: 2024-02-21T15:07:34.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Return policy details:
Features: Analog, Digital, Input: Analog RF, QAM, QAM / 8VSB, EAS Interface, EIA-608 Closed Captions, digital and analog heterodyne processor
Number of Outputs: 2
Number of Inputs: 2
MPN: AP-60-860
Band: UHF
Audio Inputs: Coaxial RF/F-type
Audio Outputs: Female Coax
Model: AP-60-860A
Brand: Blonder Tongue
Color: Black
Type: A/V Receiver