Description: Free eBay listing template designed by dewiso.com AI Prime / Hydra Genuine Single Lens Genuine Replacement AI Lens for AI Prime, AI Hydra & Fuge Fresh and Saltwater. This is a replacement lens Aqua Illumination lighting. These will sometimes need replacing as they can get burnt and discoloured, making your light less efficient. This lens will fit the AI Prime 16HD, Hydra 32HD and Hydra 64HD, for both Fresh and Saltwater. Please Note: These will not fit the older style Hydra 26/26HD or 52/52HD models. Fitting Instructions: The orientation of the light / lens is really important, if installed 90 degrees out of rotation the LED's will be damaged. 1. Remove the 4 x case screws (peel back the label on 16 carefully to reveal 4th screw, or 5 x screws on 64 units) 2. Gently lift the case while pushing down on the black cable grommet that goes into the case to release it, this will allow the top case to be removed fully. 3. Remove the screws from the optics. 4. Remove the optics. 5. Seat the optics making sure that you orientate them correctly, this is most important as the red, green, UV and Violet lenses are different lengths on the back of the optic so will foul the LED’s and damage them if the lens is orientated incorrectly, please see images attached showing the part no on the lens and how that number should be orientated when installing the optic. For 16 the part number should be at 12 or 6 o’clock looking at the Prime face on with the DC cable at the top of the case, take note of the part number position before removing the old lens if uncertain. 6. When installing the optic also make sure the little round stand-offs on the bottom of the optics locate into the holes in the puck, see images attached. If they aren’t in the holes when you tighten the screws again, you could damage both the optic and LED’s. Fit the case in reverse, observing that the grommet shape sits into the case is in the correct orientation others it won't push back into the case (arch shape goes into the case aperture) and push the DC cable back under the comms board so it doesn’t get in the way of the case but don't push too hard as the cable may lift the comms board up and out of the connectors. You will also have to be careful not to dislodge the rubber button whilst you get the case back on. Also place the rubber button on the board rather than in the case, as it’ll keep dropping out when installing. 7. Make sure you are running the latest firmware and for longevity of the lenses please keep the U.V and Violet channels under 70% max as there is no good reason to run them above this and running the channels into HD doesn’t improve colour, growth or health of the coral in our experience and will just decrease the maintenance life of the lens. Delivery Info All orders are sent out via Tracked Courier Service from our UK Warehouse - Tracking will be supplied through eBay once your order has shipped. All orders are sent out within 24 hours (Mon-Fri, excluding bank holidays). Urmston Aquatics and Reptile Centre
Price: 13.49 GBP
Location: Manchester
End Time: 2024-10-19T23:31:32.000Z
Shipping Cost: 21.85 GBP
Product Images
Item Specifics
Return postage will be paid by: Buyer
Returns Accepted: Returns Accepted
After receiving the item, your buyer should cancel the purchase within: 30 days
Return policy details:
Brand: AI
Bulb Type: LED
Water Type: Marine
