2GIG Wireless Thin Door/Window Contact (2GIG-DW10-345)

Description: Monitor the status of any open/close object, including a door, window, cabinet, drawer, etc., with the 2GIG Wireless Thin Door/Window Contact. The wireless, battery-powered sensor works with the 2GIG Go!Control panel or Vario wireless receiver, and features an exceptionally narrow width to fit into small spaces. When the monitored door/window is opened, the sensor signals the control panel to trigger an alarm.Monitors open/close status of an objectNarrow 3/4" sensor fits into small spacesSupports internal and external contactsCan be used for two security zonesWorks with 2GIG wireless systems (345 MHz) In addition to monitoring the primary door/window, the Thin Door/Window Contact can be used for a second security zone. It has an external input that accepts Normally Closed (NC) dry contact devices. The sensor also has a tamper-resistant cover that will trigger an alert if removed. How It Works The Door/Window Contact consists of two pieces (sensor and magnet), which easily install using the included mounting tape. The sensor mounts on the door/window itself, and the magnet mounts on the frame. When the two are separated, the sensor signals the control panel.ContentsDoor/Window ContactMagnet(2) ScrewsMounting TapeWire Lead, 12"(2) Lithium BatteriesInstruction Manual NOTE: Requires connection to a 2GIG wireless system, such as a GoControl Panel or a Vario wireless-enabled system.Technical DetailsMPN: 2GIG-DW10-345Wireless Signal Range: 350 feet, open air, with 2GIG Wireless Control PanelCode Outputs: Alarm; Alarm Restore; Supervisory; Low Battery; External Alarm; External Restore; Tamper; Tamper RestoreTransmitter Frequency: 345.000 MHz (crystal controlled)Transmitter Frequency Tolerance: ±15kHzTransmitter Bandwidth: 24kHzModulation Type: Amplitude Shift Keying-On/Off Keying (ASK-OOK)Unique ID Codes: Over one million different code combinationsSupervisory Interval: 70 minutesPeak Field Strength: Typical 36,000 uV/m at 3mExternal Input Sampling Current: 20 uAExternal Input: Accepts N/C dry contact devicesReed Switch Magnetic Sensitivity: 10 to 20 amp turnsReed Sensitivity: 0.625 in. (1.59 cm) minimum gap, 0.85 in. (2.16 cm) typicalMagnet Dimensions: 1.3(L) x 0.435(W) x 0.312(H) inches (3.3 x 1.1 x 0.79 cm) typicalMagnet Type: Rare earthSensor Dimensions: 2.59 x 1.03 x 0.49 inches (6.58 x 2.62 x 1.24 cm)Weight: 1.1 ounces (31.2 g), including battery and magnetHousing Material: ABS plasticColor: WhiteOperating Temperature: 32° to 104° F (0° to 40° C)Relative Humidity: 5 to 95 percent Non-CondensingBattery: Two Panasonic CR2032 or equivalent Lithium batteries (installed with pull tab)Included Accessories: Two Phillips flat-head screwsWarranty: 2 Years Limited

Price: 19 USD

Location: San Diego, California

End Time: 2024-08-03T19:22:39.000Z

Shipping Cost: N/A USD