Description: These 4 pin RGB 5050 LED strip connectors provide straight connecion for your DIY project. Precautions before installation: When you cut your LED strip into 2 LED strips, you should cut very carefully along the cutting line, to make sure the area of the copper contacts on the 2 LED strips are the same. (not a bigger area of copper contacts on one LED strip, and a smaller area of copper contacts on the other LED strip.). If the area of the copper contacts on the LED strip is too small, the 4 electrical conductors in the connectors can not totally touch the 4 copper contacts on the LED strip, and there will be poor electrical conductivity. As a result, you may get 2 different colors or even get no colors at all. Installation Instructions: 1. Ensure your LED strip is 10mm wide and has 4 copper contacts at the cutting line. 2. Carefully cut your LED strip along the cutting line. Do not tear off the paper on the back of the LED strip before finishing the connection. Just insert the paper and the LED strip together into the connector. This will be easier to insert the LED strip into the connector without bending the LED strip into damage, and the connection will also be more stable. 3. Open the cap of the connector. 4. If you use a non-waterproof LED strip, please insert the LED strip into the connector. Make sure the 4 copper contacts on the LED strip are under the 4 electrical conductors in the connector; If you use a waterproof LED strip, please first remove the waterproof silicone around the cutting line, then insert the LED strip into the connector. Make sure the 4 copper contacts on the LED strip are under the 4 electrical conductors in the connector. 5. Close the cap, and check whether the connector works well. 6. Tear off the paper on the back of the LED strip to stick the LED strip, but please reserve the paper that has already been in the connector. Note: Please make sure that the positive poles of your LED strips at both ends of the connector are on the same one channel. Please make sure the arrow marks on your cable, your LED strip and your controller are on the same one channel. Solutions: If the LED strips flicker or do not light up, please follow these steps: 1. Take off the LED strip from the connector. 2. Open all caps on the connector. 3. Use a thin and hard object to simultaneously press hard on both ends of each electrical conductor in the connector, to bring the electrical conductor down to the lowest position. Make sure the electrical conductor can touch the surface of the bottom of the connector without any pressure. In this way, the 4 electrical conductors in the connector can fully touch the 4 copper contacts on the LED strip, ensuring good electrical conductivity. 4. Insert the LED strip into the connector. Package Includes: 10 x Gapless 4 pin RGB 5050 LED strip connector Compatible with both Non-Waterproof and Waterproof SMD 5050 RGB LED strip lights that are 10mm in width and have 4 copper contacts at every cutting line on the LED strip These connectors are made of PVC, which is flame retardant and durable, thus ensuring personal safety and a longer service life. Simple but effective, tool free, easy installation, seamless extension by snapping system, making a neat and good looking layout, couldn't be easier using these connectors. Working voltage: DC 5V-24V. Working current: 5A max. Package:10x 4pin connectors for 10mm wide SMD 5050 RGB LED strip.
Price: 8.08 USD
Location: Eugene, Oregon
End Time: 2024-11-25T17:51:02.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Return policy details:
Color: White (for RGB 5050 LED strip)
Size: 4 pin (for RGB 5050 LED strip)
EAN: 0766832890164
ISBN: 0766832890164
Package Dimensions LxWxH: 6.1x3.9x0.24 Inches
Weight: 0.03 Pounds
Type: Does not apply
Brand: TronicsPros
